Your installation is covered by our workmanship warranty as well as specific warranties supplied by the manufacturer of the various components, as per their own warranties. Your installation warranty is effective for 12 months from the date of installation; and is activated upon receipt of full payment for the job.

The Cylinder Guy will not be responsible for the costs of other plumbing or electrical company’s attendance.  Any workmanship related remedial activity must be undertaken by your installing tradesperson or by an alternative tradesperson of our choosing. Any deviation from this must be approved in advance and in writing (via text or email) by The Cylinder Guy Ltd or will cause the warranty to be void and costs will be incurred.

All installation work undertaken by The Cylinder Guy Ltd is covered by a comprehensive 12 Month Workmanship Guarantee against any defects raised against the work performed by the original contractor only.

For any hardware related failure, the manufacturer’s warranty will dictate response times and coverage. This information is available on the manufacturer’s website. Examples of the various types of warranties may include:

• Stainless mains pressure hot water cylinders – 10 years on the cylinder and 3 years labour
• Low-pressure hot water cylinders – 5 years on the cylinder with 1-year parts & labour
• Electrical components (element & thermostat) – 1-year parts and 1-year labour
• Valves – 5 years parts and 2 years labour

For the water heater itself, we typically request that you call the manufacturer’s 0800 contact number as this will result in the fastest remedy for you. For other hardware, such as valves/regulators/etc, your installing plumber will typically visit to repair or replace the failed component and may invoice the manufacturer directly:

Rheem NZ Ltd – 0800 657 336 / Website:  http://www.rheem.co.nz/spare-parts-manual/

Rinnai NZ Ltd – 0800 746 624 (0800 RINNAI) / Website:  https://rinnai.co.nz/page/38/warranty

Within the standard warranty periods, faults that are covered by the warranty may be repaired free of charge, but calls outside of the warranty period, and faults not covered by the warranty will incur costs.

The conditions applicable to the warranty given are:
(a) the warranty shall not cover any defect or damage which may be caused or partly caused by or arise through:
(i) failure on the part of the Customer to properly maintain any materials; or
(ii) failure on the part of the Customer to follow any instructions or guidelines provided by  TCG (The Cylinder Guy or their representatives); or
(iii) any use of any materials otherwise than for any application specified on a quote or order form; or
(iv) the continued use of any materials after any defect becomes apparent or would have become apparent to a reasonably prudent operator or user; or
(v) fair wear and tear, any accident or act of God.
(b) the warranty shall cease and TCG shall thereafter in no circumstances be liable under the terms of the warranty if the workmanship is repaired, altered or overhauled without TCG’s consent.
(c) in respect of all claims, TCG shall not be liable to compensate the Customer for any delay in either replacing or remedying the workmanship or in properly assessing the Customer’s claim.

For all materials, the warranty shall be the current warranty provided by the manufacturer of the materials. TCG shall not be bound by nor be responsible for any term, condition, representation or warranty other than that which is given by the manufacturer of the materials.